Home    Company Information    What's New    Contact Us   
 
TST/DMT Interface to QL II
valve testing sensors / systems / software

Download the brochure

The TST/DMT Interface is for those clients who wish to use the Crane Torque Switch and Displacement Measuring Transducers* with the Teledyne QUIKLOOK II Motor Operated Valve Diagnostic System.

Features:
  • Uses standard QUIKLOOK excitation power
  • Self-contained solution
  • Accuracy 1% of Reading


The TST/DMT Interface (P/N 160066), together with included cable (P/N 160067), may be used on any QLII channel. There are two receptacles on the Interface box; connect the 7-pin Lemo plug on the Interface cable to the 7-pin receptacle, the QLII input cable plug to the 4-pin Lemo, and the MS connector to the transducer. To configure the QLII channel enter the original transducer sensitivity divided by the attenuation factor noted on the TST/DMT Interface (typically 0.5) and set the channel type for voltage.

* The Torque Switch Transducer (TST) and Displacement Measuring Transducer are products of the Crane Nuclear Company. 		   

Home | e-mail: sales_testservices@teledyne.com

Copyright © 2011 Teledyne Technologies Incorporated. All rights reserved.
Teledyne Test Services • 513 Mill Street • Marion, MA 02738 • USA